diff --git a/smarthome/home-dashboard-controls/index.njk b/smarthome/home-dashboard-controls/index.njk
index bd3dc39..978629f 100644
--- a/smarthome/home-dashboard-controls/index.njk
+++ b/smarthome/home-dashboard-controls/index.njk
@@ -26,7 +26,7 @@ parent: "/smarthome/"
 <h2>Tasmota smart plugs</h2>
 <ul>
 <li><strong>TasmoAdmin</strong>, link straight into the central Tasmota device dashboard for firmware and config management.</li>
-<li><strong>Power strips (Gosund P1)</strong>, two multi-outlet strips covering the home-office network gear and backup drive, and the iMac corner with its peripherals.</li>
+<li><strong>Power strips (Gosund P1)</strong>, two multi-outlet strips covering the study network gear and backup drive, and the iMac corner with its peripherals.</li>
 <li><strong>Single sockets (SP112)</strong>, four individually switchable outlets covering hallway, kitchen, dryer and washing machine circuits, each also powering an associated LED matrix or small Pi.</li>
 <li><strong>Other plug families</strong>, additional Nous, Eightree (ESP32-based), Athom and IDS smart plugs cover spare capacity, living-room seating/desk outlets, storage room, kitchen appliances, and a few legacy TV/PC outlets (several currently marked defective).</li>
 </ul>
@@ -34,8 +34,8 @@ parent: "/smarthome/"
 
 <h2>Special devices &amp; status</h2>
 <ul>
-<li><strong>Tasmota RF Bridge / Delock</strong>, bridges RF-only devices (like the home-office 3D printer plug) into the Tasmota/MQTT ecosystem.</li>
-<li><strong>LED Matrix restarts</strong>, one-click restart buttons for each of the six room LED matrix displays (living room, study, bathroom, kitchen, hallway, Nepomuk room), avoiding a manual power-cycle.</li>
+<li><strong>Tasmota RF Bridge / Delock</strong>, bridges RF-only devices (like the study 3D printer plug) into the Tasmota/MQTT ecosystem.</li>
+<li><strong>LED Matrix restarts</strong>, one-click restart buttons for each of the six room LED matrix displays (living room, study, bathroom, kitchen, hallway, children's room), avoiding a manual power-cycle.</li>
 <li><strong>Healthchecks &amp; version info</strong>, direct links into the Healthchecks dashboard and a version/status overview for the connected devices.</li>
 </ul>
 
diff --git a/smarthome/homematic-mqtt/index.njk b/smarthome/homematic-mqtt/index.njk
index 5f82228..338feba 100644
--- a/smarthome/homematic-mqtt/index.njk
+++ b/smarthome/homematic-mqtt/index.njk
@@ -9,7 +9,7 @@ layout: base.njk
 <h1>HomematicIP + MQTT</h1>
 <div class="detail-content">
 
-<p>HomematicIP room thermostats (living room, bedroom, home office) report
+<p>HomematicIP room thermostats (living room, bedroom, study) report
 temperature and humidity into the smart home dashboard via a small,
 deliberately low-tech bridge: <strong>Home Assistant → MQTT → InfluxDB</strong>.</p>
 
diff --git a/smarthome/tasmota-energy/index.njk b/smarthome/tasmota-energy/index.njk
index bf33e53..576249c 100644
--- a/smarthome/tasmota-energy/index.njk
+++ b/smarthome/tasmota-energy/index.njk
@@ -11,7 +11,7 @@ layout: base.njk
 
 <p>Power monitoring across the flat runs on a mix of Tasmota-flashed smart
 plugs, tracking accumulated kWh per device and feeding daily usage
-figures into the home dashboard. The setup uses 8 Tasmota-enabled devices
+figures into the home dashboard. The setup uses a number of Tasmota-enabled devices
 covering kitchen appliances, office equipment, entertainment systems,
 and LED matrix displays.</p>